10 Home Improvement DIY Safety Tips

DIY Safety TipsWith so many different guides on the internet for various projects around your home, you would be surprised at how many do not include a diy safety tips section. Thousands of injuries happen during home renovation and DIY projects each year in the U.S. But by following certain rules, most of these could be avoided if we would just take the time to read up on what to watch out for and be prepared for inevitable accidents. Whether you are installing carpet or hardwood, painting a ceiling, or constructing a deck in the back yard, safety is the most important aspect of the project. Today, we will be discussing exactly this by providing you with 10 DIY  tips to approach every home improvement job that you can come up with.


10 DIY Safety Tips


1.  Don’t make up your own rules, follow the instructions or guides directions. Many people decide to wing it on their first attempt at a DIY project. As human beings we prefer to figure things out on our own through trial and error. The problem with this is the error. When you don’t follow directions to a “T” you are literally ignoring any precautionary measures or warning provided by the manufacturer of your chosen project. Following your own beat can often be the culprit of fires, electrical shock or other dangerous outcomes.


DIY Safety Tips

2.  Inspect and take care of your Tools. Neglected tools like saws, hammers, ladders, etc., can spell disaster if you begin to use them and they aren’t in good condition.  Inspecting your tools before use, cleaning them on a regular basis and proper storage are key elements for healthy hardware. Take care of your tools and they will take care of you.


3.  Turn off power tools when not in use. An excellent DIY Safety Tip. Don’t leave your tools running idle if you need to step away for a moment. Always turn off and unplug if you are leaving the work area. Children have curious hands and so do some adults for that matter. It is always best to take this precaution to heart for the safety of everyone around.


4.  Pay attention to your environment and fellow DIY workers. Many times we find ourselves in tight spaces with very limited area to work in. If you pair this with people and are not aware of what is going on around you, you are liable to bump into something that you shouldn’t. If someone or you are around someone and are about to pass behind them, make sure to let them know so they do not turn around and meet a board to the face.


5. Clean as you go. This is something I have trouble with. Keeping your area as clean as you can reduced clutter and allows for more movement. Keeping an tidy will prevent unnecessary falls and trips from happening.


DIY Safety Tips

6.  Dress to work, not to play. Working on a DIY project is not a fashion show. Always remove watches, jewelry and sunglasses when using tools, especially power tools. Avoid long sleeves and loose fitting clothes.


7.  Take precaution when using a ladder. Ladder safety is something that we typically pay attention to because when we are off the ground we realize the danger of a fall. That being said however, some of us do not worry about height. The proper angle of a ladder that stands against a wall is 1 foot away from the wall for each 4 feet of height. This means that if your destination is 12 feet high, the base of the ladder should be 3 feet from the wall. Also make sure that you are on a level surface so that the ladder can properly balance.


8.  Power tool checks can save your life. Like regular tools you will need to check your cords for anything abrasions to the wires so that you do not shock yourself or someone else. Properly sharp blades for saws are a must as well.


9.  Safety accessories should be worn at all times. Don’t ignore safety goggles, gloves, masks and work shoes. These can make the difference in getting something in your eye, splinters in your hand, breathing in harsh chemical, or even loosing a toe.


10.  Keep a First Aid Kit handy and have an emergency plan. A first aid kit could literally save your life if you were in dire need, so it is best to always have one on hand when doing something that involves cutting or any manual labor. Having a plan to contact the proper authorities in the event of an accident is a must as well. Always tell someone before you begin a job so that you can be assured that if for some reason you are unable to move should an accident occur. Someone knows where you are.

Click Here to View Our Selection of

DIY Friendly Flooring Options!


You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *